The electro-permanent magnet quick mold change system for punch presses is suitable for molds of any shape and size. Existing molds can be used on punch presses equipped with HQMC system without modification. There is no need to formulate special mold standards, which saves design and production time and reduces Cost, and at the same time, you can add all kinds of equipment you need on the disk: positioning device, counterbore, lower die extension plate, etc. can be customized and added. For a mold equipped with a long strip mold base, the magnetic poles on the disk can be designed into a corresponding strip shape to provide the best effect. T-slots can be added to the lower mold, which is suitable for most mold lifting slides.
Easy to install
To install the disk on your machine tool, you only need to fix the fastening screws to the existing T-slots or mounting holes on the machine table without modifying the machine tool. Advanced technological innovation makes the thickness of the disk lower, saves the mold opening stroke, and ensures that large molds can also be used on small punching machines.
easy to use
Only one operator is required and no tools are required to perform any operation on the disk system beyond the safe distance of punch operation to ensure personnel safety. Place the mold — close the punch — press the upper die magnetization button — press the lower die magnetization button to start the stamping operation, the process is simple and efficient!
safe and stable
Using electronically controlled permanent magnet technology, there is no fear of power failure! Even if the power supply is interrupted, the holding force of the disk to the mold will not be weakened at all. Such a stable holding force ensures the high precision and high quality of the stamping parts, and no more bending deformation of the mold caused by the traditional clamping method.
The electric permanent magnet quick changer adopts the international advanced magnetic circuit technology and pulse discharge technology, and uses electronic control to change the magnetic circuit distribution of the permanent magnet. The permanent magnet is used to adsorb the mold. The clamping and loosening process only takes a few seconds. It needs electric energy to maintain, which completely avoids many defects of traditional mold changing methods. All injection molding machines, clamping machines, and compression molding machines are the supporting objects of the electro-permanent magnet quick mold change system.